General InformationTripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and slot for optional Network Management Card options. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.Technical InformationPlug/Connector Type: NEMA 5-15PReceptacles: 6 x NEMA 5-15REmergency Power OFF: YesTransfer Time: 4 msPower DescriptionLoad Capacity: 750 VA/600 WInput Voltage: 120 V ACOutput Voltage: 110 V ACOutput Voltage: 115 V ACOutput Voltage: 120 V ACInput Current: 6.80 AManagementNetwork Management: SNMP ManageableInterfaces/PortsUSB: YesBattery InformationBackup/Run Time (Full Load): 8.50 MinuteBackup/Run Time (Half Load): 21 MinuteTypical Battery Recharge Time: 4.50 HourHot Swappable: YesPhysical CharacteristicsHeight: 3.5"Width: 17.4"Depth: 13.2"Rack Height: 2UForm Factor: Rack/TowerWeight (Approximate): 35.40 lbMiscellaneousPackage Contents: SMART750RMXL2U UPS SystemPowerAlert Software with USBSerial & EPO Cabling4 Post Installation KitOwner's ManualCertifications & Standards: UL1778cULClass BNOMSoftware Included: PowerAlert SoftwareEnvironmentally Friendly: YesEnvironmental Certification: RoHSWarrantyLimited Warranty: 2 Year

Voltage compatibility - 120V AC Frequency compatibility - 60 Hz Output volt amp capacity (VA) - 750 Output watt capacity (watts) - 450 Output nominal voltage - 120V AC Maintains regulated 120V nominal output 83 to 147V Output voltage regulation - LINE MODE: Sine wave line voltage 120V (-21% +8%), BATTERY MODE: Sine wave output within 5% of 120VAC Output frequency regulation - LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz Outlet quantity / type - 6 NEMA 5-15R Customized load management receptacles - Includes 2 load banks, each with 2 outlets that support load shedding and remote reboot on demand of locked network devices. Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for servers and other critical devices. Overload protection - Via 15A input circuit breaker Maximum input amps - 6.8A Input connection type - NEMA 5-15P Input cord length - 10 ft / 3m Recommended electrical service - 120V 15A Full load runtime - 16 minutes Half load runtime - 34 minutes Expandable battery runtime - Yes, runtime is expandable with optional external rack/tower battery packs BP24V28-2U (limit 1) or BP24V70-3U (multi-pack compatible) DC system voltage - 24VDC Typical battery lifespan - 4-6 years (USA typical)