The PDUMNV20HVLX 3.3–3.7kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for your IT or industrial application, the 0U PDU features 24 outlets (20 C13 and 4 C19) with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. The C20 inlet is compatible with a wide variety of user-supplied power cords for connecting to an AC source, generator or protected UPS. A detachable 10-foot cord with NEMA L6-20P plug is included. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor the total connected load in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

Distributes and Monitors Network-Grade AC Power 3.3–3.7kW 208/230V 20A monitored PDU with single-phase input l C20 inlet compatible with wide variety of user-supplied power cords Detachable 10 ft. cord with NEMA L6-20P plug included l Firmware upgrades support future product enhancements20 C13 and 4 C19 Outlets Distribute AC Power Included plug-lock inserts prevent cables from becoming accidentally disconnectedDigital Ammeter Reports total connected equipment load in real time l Supports IP-address self-ID l Rotates 180° for easy reading at either angleBuilt-In LX Platform Interface Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH l Supports 10/100 Mbps auto-sensing for communication with an Ethernet network l Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities l No Java requiredBroad Communications Compatibility Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP l Supports automatic and manual assignment of IP addressEasy 0U Installation in EIA-Standard 19 in. Racks Mounts vertically using included toolless buttons or rack-mounting brackets l Included PDUMVROTATEBRKT allows mounting with rear-facing outletsTAA-Compliant Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchasesOUTPUT Output Capacity Details 3.68kW (230V), 3.33kW (208V) / 16A total capacity; 16A max per C19 outlet; 12A (10A CE) max per C13 outlet Frequency Compatibility 50 / 60 Hz Output Receptacles (20) C13; (4) C19 Output Nominal Voltage 208; 230 Overload Protection n/aINPUT PDU Input Voltage 208; 230 Recommended Electrical Service 20A 208V; 16A 230V Maximum Input Amps 20 Input Connection Type C20 inlet accepts included L6-20P input cable. Alternate C19 input cordsets supported. PDU Plug Type NEMA L6-20P; IEC-320 C20 Input Cord Length (ft.) 10 Input Cord Length (m) 3.05 Input Phase Single-PhaseUSER INTERFACE, ALERTS & CONTROLS Front Panel LCD Display Digital meter reports PDU output current in amps, Scroll IP-address information; Display can be rotated 180 degrees for installation with the input cable at the top Front Panel LEDs n/a Switches Press the SCROLL IP / ROTATE button and release after one second to display the configured IP address in 2 digit intervals; Press and release after two seconds to rotate the display 180 degreesPHYSICAL Shipping Dimensions (hwd / in.) 4.000 x 6.000 x 72.500 Shipping Dimensions (hwd / cm) 10.16 x 15.24 x 184.15 Shipping Weight (lbs.) 13.5000 Shipping Weight (kg) 6.12 Unit Dimensions (hwd / in.) 70 x 2.19 x 2.65 Unit Dimensions (hwd / cm) 177.8 x 5.6 x 6.7 Unit Weight (lbs.) 8.5 Unit Weight (kg) 3.86 Form Factors Supported 0U vertical rackmount installation supported with included mounting brackets; supports tooless mounting in button- mount compatible racks PDU Form Factor 0U; VerticalENVIRONMENTAL Storage Temperature Range 5 to 140F (-15 to 60C) Relative Humidity 5-95% non-condensing Operating Elevation (ft.) 0-10,000 Operating Elevation (m) 0-3000COMMUNICATIONS SNMP Compatibility LX Platform interface includedCERTIFICATIONS UPS Certification Details EN55022:2010+2011, EN55024:2010 Certifications Tested to UL60950-1:2007 (USA), CAN/CSA-C22.2 NO. 60950-1: 2005 (Canada), CE (International), FCC Class A (Emissions), NOM (Mexico), RoHS compliant, TAA compliantPackage Includes PDUMNV20HVLX 3.3–3.7kW Single-Phase Monitored PDU l Built-in LX Platform interface l Detachable NEMA L6-20P to C19 power cord, 10 ft. l Configuration cable l (24) Plug-lock inserts l Rack-mounting hardware l PDUMVROTATEBRKT mounting bracket accessory l Owner’s manual